Galio Black Door Visor for Hyundai Venue 1st Gen 19 to 22 and 1st Gen FL 22 to 25 | Set of 4 | Black | Polycarbonate | Made in India

Set of 4 black polycarbonate door visors, custom-designed for the Hyundai Venue 1st Generation 2019 to 2022 and Venue 1st Generation Facelift 2022 to 2025

The Galio Black Door Visor is a set of four custom-made window deflectors designed to match the exact door and window profile of the Hyundai Venue 1st Generation 2019 to 2022 and the Venue 1st Generation Facelift 2022 to 2025. Made from high-quality polycarbonate in black with smooth edges and a translucent finish, each visor attaches directly to the door frame using high-quality double-sided adhesive tape.

Sun Ray Protection from the Side

Door visors deflect direct sunlight entering through the side windows, reducing the discomfort of sun rays reaching the driver and passengers during driving. This is particularly useful during peak afternoon hours when low-angle sunlight enters through the side window openings even with windows partially closed.

Translucent Design for Driver Safety

The translucent polycarbonate construction allows the driver to see through the visor surface at the window edge, maintaining lateral visibility at junctions, during lane changes, and while reversing. Unlike fully opaque visors, the Galio Black Door Visor does not create a visual blind spot at the door frame.

Improved Sweptback Stance and Aerodynamic Appeal

Door visors refine the side profile of the Venue by extending the visual line of the window, giving the car a sportier sweptback appearance. The aerodynamic profile of the visor also contributes to reducing wind drag at the window opening when partially open at speed.

Rain Ventilation and Window Fogging Prevention

Windows can be kept open during light rain with door visors fitted. The visor deflects rain away from the open window gap while allowing fresh air to enter the cabin. This also keeps air circulating inside the vehicle, which prevents cabin humidity from building up and reduces the tendency for window glass to fog in wet or humid conditions.

Parked Car Heat Protection

When parked in direct sunlight, windows can be left slightly open with door visors fitted without risk of rain entering the cabin. The partial ventilation prevents the interior from heating up excessively during parking, making the cabin significantly cooler when you return to the car.

Smooth Edges with No Color Fading Material

Each visor is finished with smooth edges for a clean, gap-free fitment against the Venue's door frame. The polycarbonate material is formulated to resist colour fading over time, retaining the black finish through prolonged exposure to sunlight and outdoor conditions.

High-Quality Double-Sided Adhesive Tape

High-quality double-sided adhesive tape is pre-applied on the mounting surface of each visor for secure, firm fitment directly onto the door frame. No drilling or screwing is required.

How to Fit

Clean the car door surface thoroughly before fitment. Any polish, wax, or dust will reduce the adhesive bond. Ensure the car body surface temperature is between 17 and 38 degrees Celsius for best adhesive performance. Place each visor on the window frame first to check position, then remove the adhesive seal and press firmly into place. Do not wash the car for at least 24 hours after fitting to allow the adhesive to cure.

Made in India

Manufactured in India.

Sales Package

Set of 4 door visors. Compatible with Hyundai Venue 1st Generation 2019 to 2022 and Venue 1st Generation Facelift 2022 to 2025.